#Image pro plus 7.0 plus#
† Image-Pro Plus is a 32-bit application. ** Suggested storage size for large image files generated by advanced cameras. Select Enter Known Calibration and then enter the calibration. * 2GB RAM is recommended on all operating systems. Enter the title of the microscope/objective lens combination in the magnification text box.
I am hoping to load my previous system's sample pattern (sample pattern tab) into the new system but cannot figure out how load list does not do anything when I try that.Windows® Vista Business and Ultimate (32 and 64 bit) (SP1) I am still having trouble loading a previous scan area/pattern (scan area tab) into the new system I cannot edit the current area (scan area tab) for frames in Y more than 1 (needs to be 28 for my system) the site/plane sections (stage tab) are greyed out the focus travel speed (lens/mag tab) is greyed out despite z being calibrated The issues I'm currently stuck with are the following (all having to do with the "stage pro" section under the acquire tab): In short, I have both manually and automatically calibrated the XY and Z positions in attempt to fix problems accessing certain functions to no avail. I have since taken some of the advice, but have more questions than answers. I came here a little while ago with some issues regarding discrepancies between an old and new system that I was hoping to rectify. Any and all help/advice is appreciated! Thank you! I have attached comparison images with brief descriptions of the issue on this post (the top image in each set is the new setup and the bottom image is the current system that is in place). Additionally, I am having some smaller issues with the scan area and sample pattern. Our original image analysis platform for customers in need of duplicate systems or support for older microscope hardware. This is an ongoing issue and I have attempted to reconfigure focus in Scope-Pro configuration a few times now to no avail. The main issue is that in Stage-Pro, the focus travel speed is greyed out.
#Image pro plus 7.0 how to#
Therefore, I am unsure how to proceed after a few last-minute hang ups. The main issue currently is that I was not the user who originally set up the existing (old) setup. There were multiple issues (both due to the stage itself and the software) in the beginning, but most of those have been worked out.
#Image pro plus 7.0 driver#
Notice : The driver supports Windows 7, Windows 8.1 and. Due to this, while IP 10 would be better/newer, I am sticking with IPP 7.0 for consistency. This driver supports Samsung NVMe SSD 970 PRO, 970 EVO, 970 EVO Plus, 960 PRO, 960 EVO and 950 PRO.
Recently, I have been trying to essentially replicate this setup to double productivity and output.
I currently have a setup using IPP 7.0 that has been up and running for years and is well established.
0 kommentar(er)
